Getting started
Driving
Automatic transmission*
Starting
Starting difficulties
̈
Make sure the gear selector lever is set
to P.
If the engine does not start as described,
carry out the following steps:
̈
̈
Do not depress the accelerator.
̈ Turn SmartKey in starter to position 0
and repeat starting procedure
Turn the SmartKey in the starter switch
to position 3 and hold until the engine
starts (୴ page 31).
(
୴ page 43).
̈ Remember that extended starting at-
tempts can drain the battery.
i
̈
Get a jump start (୴ page 326).
You can also use the “touch-start”
function. Turn the SmartKey to
position 3 and release it again
immediately. The engine then starts
automatically.
Gearshift pattern for automatic
transmission
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
P Park position with gear selector lever
lock
R Reverse gear
N Neutral
D Drive position
̈
Notify an authorized Mercedes-Benz
Center.
̈
Depress the brake pedal.
The gear selector lever lock is released.
For more information, see “Automatic
transmission*” (୴ page 142).
For information on turning off the engine,
see “Turning off engine” (୴ page 52).
44
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2004 Mercedes-Benz C-Class Operators Manual C230 C240 4MATIC C320 4MATIC C320 C32 AMG 5.0 out of 5.0 based on 1 product reviews. It is a good reference material specially if you bought the car second hand