Operation
Maintenance
Clearing the service indicator
Calling up the service indicator
Resetting the service indicator
You can clear the service indicator
̈ Switch the ignition on.
In the event that a service on your vehicle
is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
̈
Press the j button on the multi-
The standard display of the control sys-
tem appears (୴ page 129).
function steering wheel.
The service indicator is cleared and the
standard display appears in the multi-
function display.
̈ Press button k or j on the mul-
tifunction steering wheel until the
FSS PLUS indicator appears in the mul-
tifunction display.
̈
Switch the ignition on.
The standard display of the control sys-
tem appears (୴ page 134).
Service term exceeded
̈
Press button k or j on the mul-
tifunction steering wheel until the
FSS PLUS indicator appears in the mul-
tifunction display.
i
If you have exceeded the suggested ser-
vice term, you will see the following mes-
sage in the multifunction display:
If the battery is disconnected, the days
of disconnection will not be included in
the count shown by the service indica-
tor. To arrive at the true service dead-
line, you will need to subtract these
days from the days shown in the ser-
vice indicator.
̈ Press the reset button (୴ page 22) for
Service A exceeded by XXXXX miles (km)
Service A exceeded by XXX days
Service A exceeded by X day
about five seconds.
Any authorized Mercedes-Benz Center will
reset the service indicator following a com-
pleted service.
Do not confuse the service indicator
with the engine oil level indicator :.
298
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Am looking for years 2004 e200 . Can you please support?