Practical hints
Flat tire
i
If sealant has leaked out, let it dry. You
can then peel it off.
!
̈ Unscrew the air pump’s air hose 5
from flange 6 of the TIREFIT contain-
er.
Do not operate the electric air pump
longer than eight minutes without in-
terruption. Otherwise it may overheat.
̈
Screw air hose 5 onto tire valve 7.
Unscrew the valve cap from tire
valve 7.
Inflate the tire again.
̈
You may operate the air pump again af-
ter it has cooled off.
Warning!
G
̈
̈
Screw filler hose a onto tire valve 7.
After five minutes, the pressure gauge
must display at least 26 psi (1.8 bar). The
air hose can become hot during inflation.
Please exercise appropriate caution.
Insert electrical plug 4 into vehicle
cigarette lighter socket.
If a tire pressure of 26 psi (1.8 bar) is not at-
tained, tire is too severely damaged for
TIREFIT to provide a reliable tire repair.
̈
Turn SmartKey in starter switch to
position 1 (୴ page 31).
̈
If this tire pressure is not attained, turn
off the electric air pump, detach the fill-
er hose from the tire valve, and drive
vehicle back and forth very slowly ap-
proximately 30 ft (10 m).
In this case, TIREFIT cannot properly seal
the tire.
or
Press the KEYLESS-GO* start/stop
button (୴ page 33) on the selector le-
ver once. Do not depress brake pedal.
Do not drive the vehicle.
̈
Contact the nearest Mercedes-Benz Center
or call Roadside Assistance.
This serves to better distribute the
TIREFIT sealant material inside the tire.
̈
Press I on electric air pump switch 8.
̈
After attaining a tire pressure of 26 psi
(1.8 bar), press 0 on electric air pump
The electric air pump should now
switch on and inflate the tire.
switch 8.
The electric air pump should now be
switched off.
368
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Am looking for years 2004 e200 . Can you please support?