Practical hints
What to do if …
̄
What to do if …
Lamps in instrument cluster
General information:
If a bulb in the instrument cluster fails to
come on during the bulb self-check when
turning the SmartKey in the starter switch
to position 2, have it checked and replaced
if necessary.
Problem
Possible cause
Suggested solution
-
The yellow ABS malfunction
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
warning lamp comes on while
driving.
switched off. The BAS and the ESP are also
switched off (see messages in display).
Wheels may lock during hard braking,
reducing steering capability.
The SBC brake system is still functioning nor- ̈ Have the system checked at an autho-
mally but without the ABS available.
rized Mercedes-Benz Center as soon
as possible.
If the ABS control unit is malfunctioning, oth-
er systems such as the Parktronic system*, Failure to follow these instructions in-
Distronic*, or the automatic transmission
may also be malfunctioning.
creases the risk of an accident.
̈
Read and observe messages in the
display (୴ page 318).
The charging voltage has fallen below
When the voltage is above this value
again, the ABS is operational again.
10
volts. The ABS has switched off.
̈
If necessary, have the generator and
battery checked.
310
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E500, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Am looking for years 2004 e200 . Can you please support?