Practical hints
Flat tire
Adding TIREFIT
̈ Remove plug 5 from end of hose 4.
̈ Reinstall valve cap on valve stem 1.
̈ Install plug 5 onto end of hose 4.
̈
̈
Push hose 4 onto valve stem 1.
Hold TIREFIT container 3 upside down
(hose down) and squeeze firmly several
times until entire contents of the con-
tainer are in tire.
i
If sealant has leaked out, let it dry. You
can then peel it off.
̈
Pull hose 4 off and screw tire valve
core 6 tightly into the valve stem 1
using valve stem tool 2.
̈
̈
Drive the vehicle back and forth very
slowly approximately 30 ft (10 m).
This distributes the TIREFIT sealant
material inside the tire.
i
1
2
3
4
5
6
Valve stem
Valve stem tool
TIREFIT container
Filler hose
Filler hose plug
Tire valve core
If the removed tire valve core is dirty,
use the spare tire valve core stored
with the valve stem tool.
Take the electric air pump out of the
trunk (୴ page 214).
̈
̈
Unscrew the valve cap from valve 1.
Remove tire valve core 6 from valve
stem 1 using valve stem tool 2.
Keep tire valve core 6 clean and dry.
237
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLK-Class Manuals |
|---|---|
| Tags | Mercedes-Benz SLK230, Mercedes-Benz SLK32 AMG, Mercedes-Benz SLK320 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)