Practical hints
Flat tire
i
If sealant has leaked out, let it dry. You
can then peel it off.
After 5 minutes, the pressure gauge must
display at least 26 psi (1.8 bar). The air
hose can become hot during inflation.
Please exercise appropriate caution.
G
Warning!
If a tire pressure of 26 psi (1.8 bar) is not at-
tained, tire is too severely damaged for
TIREFIT to provide a reliable tire repair.
If this tire pressure is not attained, turn
off the electric air pump, detach the fill-
er hose from the tire valve, and drive
vehicle back and forth very slowly ap-
proximately 30 ft (10 m).
̈
Unscrew the valve cap from tire
valve 7.
̈
In this case, TIREFIT cannot properly seal
the tire.
̈
̈
Screw filler hose onto tire valve 7.
Insert electrical plug 4 into vehicle
Do not drive the vehicle.
cigarette lighter socket.
This serves to better distribute the
TIREFIT sealant material inside the tire.
Contact the nearest Mercedes-Benz Center
or call Roadside Assistance.
̈
̈
Turn key in steering lock to position 1
(
୴ page 29).
̈
̈
Unscrew the air pump’s air hose 5
from flange 6 of the TIREFIT contain-
er.
Press I on electric air pump switch 8.
̈
̈
After attaining a tire pressure of 26 psi
bar), press 0 on electric air pump
switch 8.
(1.8
The electric air pump should now
switch on and inflate the tire.
Screw air hose 5 onto tire valve 7
and inflate the tire again.
The electric air pump should now be
switched off.
!
Do not operate the electric air pump
longer than eight minutes without in-
terruption. Otherwise it may overheat.
Turn key in steering lock to position 0
(
୴ page 29).
You may operate the air pump again af-
ter it has cooled off.
242
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLK-Class Manuals |
|---|---|
| Tags | Mercedes-Benz SLK230, Mercedes-Benz SLK32 AMG, Mercedes-Benz SLK320 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)