Practical hints
Flat tire
Warning!
G
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Use only genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
Never apply oil or grease to wheel bolts.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
tip over.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
1 - 5 Wheel bolts
̈ Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
̈
Incorrect mounting bolts or improperly
tightened mounting bolts can cause the
wheel to come off. This could cause an acci-
dent. Be sure to use the correct mounting
bolts.
Lowering the vehicle
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of 80 lb-ft
̈ Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
(110
Nm).
Warning!
G
̈
Pull the jack out of the jack support
tube.
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
̈
Install jack tube cover.
80
lb-ft (110 Nm).
248
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLK-Class Manuals |
|---|---|
| Tags | Mercedes-Benz SLK230, Mercedes-Benz SLK32 AMG, Mercedes-Benz SLK320 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)