5-
8 VEHICLE MAINTENANCE REQUIREMENTS
6ZF060G1-A
o Vapour hose and fuel filler cap
present. Hoses should be replaced
immediately if there is any evidence of
deterioration or damage.
6ZF070B1-A
o Cooling system
The vapour hose and fuel filler cap
should be inspected at those intervals
specified in the maintenance sched-
ule. Make sure that a new vapour
hose or fuel filler cap is correctly re-
placed.
Check the cooling system part, such
as radiator, coolant reservoir, hoses
and connections for leakage and dam-
age. Replace any damaged parts.
6ZF060H1-A
o Air cleaner filter
A Genuine Hyundai air cleaner filter is
recommended when filter is replaced.
6ZF070C1-A
o Engine coolant
6ZF060F1-A
o Vacuum, crankcase
ventilation hoses
The coolant should be changed at
the intervals specified in the mainte-
nance schedule.
6ZF060J1-A
o Spark plugs
Make sure to install new spark plugs
of the correct heat range.
Inspect the surface of hoses for evi-
dence of heat and/or mechanical dam-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Par-
ticular attention should be paid to ex-
amining those hose surfaces nearest
to high heat sources, such as the
exhaust manifold.
Inspect the hose routing to assure
that the hoses do not come in contact
with any heat source, sharp edges or
moving component which might cause
heat damage or mechanical wear.
Inspect all hose connections, such as
clamps and couplings, to make sure
they are secure, and that no leaks are
6ZF070D1-A
o Manual transaxle oil
Inspect the manual transaxle oil ac-
cording to the maintenance schedule.
F060N01X-GAT
o Valve clearances (1.1 L)
Incorrect valve clearance will not only
result in unsteady engine operation,
but will also cause excessive noise
and reduced engine performance. In-
spect valve clearance and adjust as
required while the engine is hot.
NOTE:
If the oil level is low, check for
possible leaks before adding oil.
Do not overfill.
Valve-to-rocker arm clearance
Intake valves ..... 0.2 mm (0.008 in.)
Exhaust valves ... 0.25 mm (0.010 in.)
Product Specification
Categories | Hyundai Manuals, Hyundai Getz Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Getz |
Document File Type | |
Copyright | Attribution Non-commercial |