3-
10 WHAT TO DO IN AN EMERGENCY
with the studs and slide the wheel onto
them. If this is difficult, tip the wheel
slightly and get the top hole in the
wheel lined up with the top stud. Then
jigglethewheelbackandforthuntilthe
wheel can be slid over the other studs.
D060H02A-AAT
7. Re-install Wheel Nuts
!
WARNING:
Wheel and wheel covers may have
sharp edges. Handle them carefully
to avoid possible severe injury.
Before putting the wheel into place,
be sure that there is nothing on the
hub or wheel (such as mud, tar,
gravel, etc.) that interferes with the
wheel from fitting solidly against
the hub. If there is, remove it. If
there is not good contact on the
mounting surface between the
wheelandhub,thewheelnutscould
loosen and cause the loss of a
wheel.Lossofawheelmayresultin
loss of control of the vehicle. This
may cause serious injury or death.
HTB227
To reinstall the wheel cover, hold it on
the studs, put the wheel nuts on the
studs and tighten them finger tight.
The nuts should be installed with their
small diameter ends directed inward.
Jigglethetiretobesureitiscompletely
seated, then tighten the nuts as much
as possible with your fingers again.
HTB229
TBENG_3.P65
10
3/9/2005, 5:02 PM
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)