DO-IT-YOURSELFMAINTENANCE 6-17
!
WARNING:
The cooling fan is controlled by en-
gine coolant temperature and may
sometimes operate even when the
engine is not running. Use extreme
caution when working near the
bladesofthecoolingfansothatyou
are not injured by a rotating fan
blade. As the engine coolant tem-
peraturedecreases,thefanwillauto-
matically shut off. This is a normal
condition.
Fluid level should be within
"HOT" range
C090A03FC
HTB164
Wipe the dipstick, replace it fully and
promptly remove it again. The fluid
levelshouldbebetweentheupperand
lowermarks.Fluidneedonlybeadded
ifthelevelisatorbelowthelowermark
andmustneverbeincreasedabovethe
higher mark. If additional fluid is re-
quired, this should be poured into the
transmission through the dipstick tube
with the aid of a suitable funnel.
Withtheengineidlingandthefootbrake
applied, the transaxle selector should
be moved from the "P" or "N" position
through to the "L" position and back to
the "N" or "P" position.
Open the bonnet and remove the
transaxle dipstick, remembering that
care must be exercised to prevent in-
jury occurring through contact with hot
or rotating parts of the engine.
!
WARNING (Diesel only):
Neverworkoninjectionsystemwith
enginerunningorwithin30seconds
after shutting off engine. High pres-
sure pump, rail, injectors and high
pressure pipes are subject to high
pressure even after the engine
stopped. The fuel jet produced by
fuelleaksmaycauseseriousinjury,
if it touch the body. People using
pacemakers should not move than
30cm closer to the ECU or wiring
harnesswithintheengineroomwhile
engine is running, since the high
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)