6-
28 DO-IT-YOURSELFMAINTENANCE
G290B01TB-EAT
Adjustment After Headlight As-
sembly Replacement
the center of headlights.
SPECIFICATIONS:
G270A01TB-EAT
REPLACING LIGHT BULBS
Headlight Bulb
"H"
In the event of bulb failure being expe-
rienced,ensurethattherelativelighting
circuitisturnedoffpriortoattemptingto
replace the bulb. The illustrations on
thefollowingpagewillassistinlocating
and removing the various bulbs. En-
sure that the replacement bulb has the
samecapconfigurationandwattageas
theoriginal.
1
.18 in. (30mm) Vertical line
Horizontal center line of headlights
from ground.
: 26.8 in.(656 mm)
Horizontal line
.59in. (15mm)
W
0
"P"
"W"
Distance between each headlight
center.
H
Cut-off line
:
43.3 in. (1,100 mm)
L
Ground
line
H
"L"
Distance between the headlights
andthewallthatthelightsaretested
against.
G290B01L
!
CAUTION:
If the vehicle has had front body re-
pairer and the headlight assembly has
been replaced, the headlight aiming
should be checked using the aiming
screenasshownintheillustration.Turn
on the headlight switch. (Low Beam
Position)
Keep the lamps out of contact with
petroleumproduct,suchasoil,gaso-
line, etc.
:
118 in. (3,000 mm).
1.
Adjust headlights so that main axis
oflightisparalleltocenterlineofthe
body and is aligned with point "P"
shown in the illustration.
2.
Dotted lines in the illustration show
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)