2-
4 DRIVING YOUR HYUNDAI
C040A01A-AAT
KEY POSITIONS
NOTE:
o "START"
The engine is started in this position. It
will crank until you release the key.
To unlocking the steering wheel,
insert the key, and then turn the
steering wheel and key simulta-
neously.
!
WARNING:
The engine should not be turned
off or the key removed from the
ignition key cylinder while the ve-
hicle is in motion. The steering
wheel is locked by removing the
key.
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
C070C01A-AAT
To Remove The Ignition Key
o "ON"
When the key is in the "ON" position,
the ignition is on and all accessories
may be turned on. If the engine is not
running, the key should not be left in
the "ON" position. This will discharge
the battery and may also damage the
ignition system.
ACC
LOCK
ON
ACC
LOCK
ON
START
o "ACC"
With the key in the "ACC" position,
someelectricalaccessories(radioetc.)
may be operated.
C070C01E
START
1. Turn the ignition key to the "ACC"
position.
o "LOCK"
The key can be removed or inserted in
this position.
To protect against theft, the steering
wheel locks by removing the key.
2. Simultaneously push and turn the
ignition key counterclockwise from
the "ACC" position to the "LOCK"
position.
C040A01E
3.
The key can be removed in the
"LOCK" position.
TBENG_2.P65
4
3/9/2005, 5:00 PM
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)