Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
D250000AUN
WARNING - Windshield
heating
Do not use the
during cooling
or
operation
position
in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
OFD047114
OFD047115
D240208AUN
Manual climate control system
or button to the
position and
OFF mode
fan speed control knob or button to
the lower speed.
D250101AFD
Push the OFF button to turn off the air cli-
mate control system. However you can
still operate the mode and air intake but-
tons as long as the ignition switch is in
the position ON.
To defog inside windshield
1.
Select any fan speed except “0” posi-
tion.
2. Select desired temperature.
•
For maximum defrosting, set the temper-
ature control to the extreme right/hot posi-
tion and the fan speed control to the
highest speed.
3.
4.
Select the
or
position.
The outside (fresh) air and air condi-
tioning will be selected automatically.
•
•
•
If warm air to the floor is desired while
defrosting or defogging, set the mode to
the floor-defrost position.
If the air-conditioning and outside (fresh)
air position are not selected automatical-
ly, press the corresponding button manu-
ally.
Before driving, clear all snow and ice from
the windshield, rear window, outside rear
view mirrors, and all side windows.
Clear all snow and ice from the hood and
air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up inside of the
windshield.
4
84
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)