2008 Hyundai I30 Owners Manual

Safety system of your vehicle
To raise the height adjuster, pull it up (1).
To lower it, push it down (3) whilst press-
ing the height adjuster button (2).
Release  the  button  to  lock  the anchor
into   position.   Try   sliding   the   height
adjuster  to  make sure that it has  locked
into position.
WARNING
Verify the shoulder belt anchor is
locked into position at the appro-
priate height.   Never position the
shoulder belt across your neck or
face.  Improperly  positioned seat
belts  can cause  serious  injuries
in an accident.
1
B200A01NF-E
B210A01NF-E
To release the seat belt:
The seat belt is released by pressing the
release button  (1) in  the locking  buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
WARNING
You should  place the  lap  belt por-
tion as low  as possible and snugly
across your hips, not on your waist.
If the lap belt is located too high on
your  waist,   it   may  increase   the
chance  of injury  in  the event  of  a
collision. Both arms  should not be
under or  over the belt.  Rather, one
should be over and the other under,
as shown in the illustration.
Failure to replace  seat belts after
an accident could  leave you with
damaged seat  belts  that will  not
provide protection in the event of
another  collision leading  to per-
If this does not happen, check the belt to
be sure it is not twisted, then  try again.
sonal  injury  or  death.
Replace
your seat  belts after  being in  an
accident as soon as possible.
Never wear  the seat belt  under the
arm nearest the door.
3
16
Product Specification
Categories Hyundai Manuals, Hyundai i30 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 726 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i30
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field