Maintenance
G200400AUN-UK
With a full-size spare tyre (if equipped)
Disc brake pads should be inspected
for wear whenever tyres are rotated.
Tyre rotation
To equalize tread wear, it is recom-
mended that the tyres be rotated
every 7,500 miles (12,000 km) or
sooner if irregular wear develops.
✽
NOTICE
Rotate radial tyres that have an
asymmetric tread pattern only from
front to rear and not from right to
left.
During rotation, check the tyres for
correct balance.
When rotating tyres, check for
uneven wear and damage. Abnormal
wear is usually caused by incorrect
tyre pressure, improper wheel align-
ment, out-of-balance wheels, severe
braking or severe cornering. Look for
bumps or bulges in the tread or side
of tyre. Replace the tyre if you find
either of these conditions. Replace
the tyre if fabric or cord is visible.
After rotation, be sure to bring the
front and rear tyre pressures to spec-
ification and check lug nut tightness.
S2BLA790
S2BLA790A
CBGQ0707A
Without a spare tyre
WARNING
Do not use the compact spare
tyre for tyre rotation.
•
• Do not mix bias ply and radial
ply tyres under any circum-
stances. This
may
cause
unusual handling characteris-
tics that could result in death,
severe injury, or property
damage.
Directional tyres (if equipped)
Refer to “Tyre and wheels” in section
9.
7
35
Product Specification
Categories | Hyundai Manuals, Hyundai i30 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, i30 |
Document File Type | |
Copyright | Attribution Non-commercial |