Maintenance
G201005AUN
G201007AUN
Tread wear
This number is the greatest amount The tread wear grade is a compara-
of air pressure that should be put in tive rating based on the wear rate of
the tire. Do not exceed the maximum the tire when tested under controlled
permissible inflation pressure. Refer conditions on a specified govern-
to the Tire and Loading Information ment test course. For example, a tire
label for recommended inflation graded 150 would wear one-and-a-
pressure.
half times (1½) as well on the gov-
ernment course as a tire graded 100.
G201006AUN
The relative performance of tires
depends upon the actual conditions
This number indicates the maximum of their use, however, and may
load in kilograms and pounds that depart significantly from the norm
can be carried by the tire. When because of variations in driving
replacing the tires on the vehicle, habits, service practices and differ-
always use a tire that has the same ences in road characteristics and cli-
load rating as the factory installed
tire.
mate.
G201004AUN
These grades are molded on the
side-walls of passenger vehicle tires.
The tires available as standard or
optional equipment on your vehicles
may vary with respect to grade.
The number of layers or plies of rub-
ber-coated fabric are in the tire. Tire
manufacturers also must indicate the
materials in the tire, which include
steel, nylon, polyester, and others.
The letter "R" means radial ply con-
struction; the letter "D" means diago-
nal or bias ply construction; and the
letter "B" means belted-bias ply con-
struction.
7
51
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)