Practical hints
Replacing bulbs
Tail lamp unit
̈ Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
̈
̈
Open trunk lid.
For driver side: Lift up the bottom and
pull out the trim panel covering the
driver side rear light.
Side marker lamp 1: Turn the new
bulb with socket on backside of tail
lamp unit clockwise until it engages.
̈
For passenger side: Open the fuse box
̈
̈
Reinstall the bulb carrier.
in the trunk (୴ page 458).
Let tabs 1 (୴ page 437) engage.
Connect the electrical connector 2
1
2
Side marker lamp
Rear fog lamp (driver’s side)/Side
marker lamp
(
୴ page 437) until it engage.
̈ Reinstall trim panel.
3
4
5
Backup lamp
Brake lamp/tail lamp
Parking and standing lamp, brake
lamp/tail lamp
License plate lamp
Since replacing the license plate lamp
bulbs is a technically highly demanding
process, we recommend you have the li-
cense plate lamp bulbs replaced at an au-
thorized Mercedes-Benz Center.
6
Turn signal lamp
1
2
Tabs
Connector
Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
̈
̈
̈
̈
Disconnect electrical connector 2.
Pull tabs 1 in direction of arrows.
Remove the bulb carrier.
Side marker lamp 1: Turn the bulb
socket on backside of tail lamp unit
counterclockwise and removes side
marker lamp 1 with bulb socket
437
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C230, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-benz W203 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
nominated as the best hip hop artist in SA 2015.
-was formally in a group known as teargas
-what is caracara about… what was the role like of the
This item is very good.
I hope it will be good to me.
Thanks.
lost, damage , Operator’s Manual 10
Greate! Place to get ibfo on your Mercedes!