Practical hints
Flat tire
୴
୴
Removing the wheel
G
Warning!
̈
Unscrew and remove the wheel bolts.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
Always replace wheel bolts that are
damaged or rusted.
Never apply oil or grease to wheel bolts.
̈
Remove the wheel.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Center or call
Roadside Assistance.
Mounting the Minispare wheel
̈
Clean contact surfaces of wheel and
wheel hub.
̈
̈
Turn crank 3 clockwise until jack 2
is fully seated in take-up bracket 1
and the jack base evenly meets the
ground.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure you are using the correct wheel
bolts.
! To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Continue to turn crank 3 until the
wheel is a maximum of 1.2 in (3 cm)
from the ground.
Warning!
G
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could fall off the jack.
444
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C230, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-benz W203 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.75 out of 5)
Automotive readers have rated 2008 Mercedes-Benz C-Class Operators Manual C230 C300 C350 Sport 4MATIC 4.8 out of 5.0 based on 4 product reviews. nominated as the best hip hop artist in SA 2015.
-was formally in a group known as teargas
-what is caracara about… what was the role like of the
This item is very good.
I hope it will be good to me.
Thanks.
lost, damage , Operator’s Manual 10
Greate! Place to get ibfo on your Mercedes!