Useful features
173
Do not hold the buttons for longer than
garage door opener may be equipped with
the “rolling code” feature.
30
seconds.
This procedure erases any previous
settings for all three channels and
X Step 7: To program the remaining two
signal transmitter buttons, repeat the steps
above starting with step 3.
initializes the memory. If you later wish to
program a second and/or third hand-held
transmitter to the remaining two signal
transmitter buttons, do not repeat this step
and begin directly with step 3.
X Step 3: Hold the end of hand-held remote
controlA of the device you wish to train
Rolling code programming
To train a garage door opener (or other rolling
code devices) with the rolling code feature,
follow these instructions after completing the
“Programming” portion (steps 1 through 6) of
approximately 2 to 12 in (5 to 30 cm) away this text. For your convenience and to
from the signal transmitter button (;,= complete the procedure faster, you might
or?) to be programmed, while keeping
want to have someone assist you.
indicator lamp: in view.
X Step 8: Locate the “training” button on the
X Step 4: Using both hands, simultaneously
press hand-held remote control buttonB
and the desired signal transmitter button
garage door opener motor head unit.
i Exact location and color of the button may
vary by garage door opener brand.
(
;,= or?). Do not release the buttons
Depending on manufacturer, the “training”
button may also be referred to as “learn” or
“smart” button. If there is difficulty locating
the transmitting button, refer to the garage
door opener Operator’s Manual.
until step 5 is completed.
Indicator lamp: will flash, first slowly and
then rapidly.
i Indicator lamp: flashes immediately
the first time the signal transmitter button X Step 9: Press the “training” button on the
is programmed. If this button has already
been programmed, the indicator lamp will
start flashing after 20 seconds.
garage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the
following two steps.
X Step 5: After indicator lamp: changes
from a slow to a rapidly flashing light,
release the hand-held remote control
button and the signal transmitter button.
X Step 6: Press and hold the just-trained
signal transmitter button (;,= or?) and
observe indicator lamp:.
If indicator lamp: stays on constantly,
programming is complete and your device
should activate when the respective signal
transmitter button (;,= or?) is pressed
and released.
X Step 10: Return to the vehicle and firmly
press, hold for 2 seconds and release the
programmed signal transmitter button (;
= or?).
X Step 11: Press, hold for 2 seconds and
release same signal transmitter button a
second time to complete the training
process.
,
i Some garage door openers (or other
rolling code equipped devices) may require
you to press, hold for 2 seconds and
release the same signal transmitter button
a third time to complete the training
process.
i If indicator lamp: flashes rapidly for
approximately 2 seconds and then turns to
a constant light, continue with
programming steps 8 through 12 as your
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
|---|---|
| Tags | Mercedes Benz SL63 AMG, Mercedes-Benz R230, Mercedes-Benz SL550, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 4)
Automotive readers have rated 2011 Mercedes-Benz SL550 SL600 SL63 AMG SL65 AMG SL600 SL65 AMG R230 Owners Manual 4.0 out of 4.0 based on 3 product reviews.