Starting and stopping the engine
for turbocharger intercooler
CAUTION
CAUTION
1.Do
engine immediately after starting
the engine.
If the engine is cold, idle for sever-
al seconds before sufficient lubri-
cation is ensured in the turbo
charger unit.
not race or accelerate the
To prevent damage to the vehi-
cle:
To prevent damage to the vehi-
cle:
•
If the engine stalls while you
are in motion, do not attempt
to move the shift lever to the P
(Park) position.
Do
not
press
the
Engine
Start/Stop button for more than
10 seconds except when the
stop lamp fuse is blown.
If traffic and road conditions
permit, you may put the shift
lever in the N (Neutral) posi-
tion while the vehicle is still
moving and press the Engine
When the stop lamp fuse is
can't start the
engine normally. Replace the
fuse with a new one. If you are
not able to replace the fuse, you
can start the engine by pressing
2.After
high speed or extended driv-
ing that requires heavy engine
load, idle the engine about 1
minute before turning the engine
off. This idle time will allow the tur-
bocharger to cool prior to shutting
the engine off.
blown, you
5
Start/Stop
button
in
an
attempt to restart the engine.
and
holding
the
Engine
Start/Stop button for 10 sec-
onds with the Engine Start/Stop
button in the ACC position.
•
Do not push or tow your vehi-
cle to start the engine.
For your safety always depress
the brake and/or clutch pedal
before starting the engine.
5-17
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)