Maintenance
Inside lamp
Tail lamp/Back-up lamp
(Bulb type)
Rear fog lamp
1.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4.Remove
the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
2.
Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5.Tail
light : Remove the bulb from
the socket by pressing it in and
rotating it counterclockwise until
the tabs on the bulb align with the
slots in the socket. Pull the bulb out
of the socket.
OLMB073051
3.
Insert a new bulb in the socket.
Back-up light : Remove the bulb
from the socket by pulling it out.
6.Insert
7.Install
a new bulb into the socket.
the socket into the assembly
by aligning the tabs on the socket
with the slots on the assembly and
turning the socket clockwise.
OLMB073052
✽ NOTICE
1.
2.
3.
Turn off the engine.
Open the tailgate.
Remove the service cover using a
flat-blade screwdriver.
If the LED type lamp does not oper-
you
checked an authorized HYUNDAI
dealer.
ate,
we
recommend
that
7-86
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)