Rear combination lamp bulb
replacement
Outside lamp
3. Loosen the lamp assembly retain-
ing screws with a cross-tip screw-
driver.
4.
Remove the rear combination
lamp assembly from the body of
the vehicle.
5.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
OLMB073048
6. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
OLMB073047
(1)
(2)
(3)
Stop/tail lamp
Rear turn signal lamp
Back-up lamp
7. Insert a new bulb into the socket
and rotating it until it locks into
place.
7
8.
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
OLMB073049
Rear turn signal lamp and stop/tail
lamp
1.
2.
Turn off the engine.
Open the tailgate.
9. Reinstall the lamp assembly to the
body of the vehicle.
7-85
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)