9.Loosen
the lug nuts with the wheel
If you have a tire gauge, check the
tire pressure (see “Tires and Wheels”
in chapter 8 for tire pressure instruc-
tions.). If the pressure is lower or
higher than recommended, drive
slowly to the nearest service station
and adjust it to the recommended
pressure. Always reinstall the valve
cap after checking or adjusting tire
pressure. If the cap is not replaced,
air may leak from the tire. If you lose
a valve cap, buy another and install it
as soon as possible. After changing
tires, secure the flat tire and return
the jack and tools to their proper stor-
age locations.
lug nut wrench and remove them
with your fingers. Remove the
wheel from the studs and lay it flat
on the ground out of the way.
Remove any dirt or debris from the
studs, mounting surfaces, and
wheel.
10.
Install the spare tire onto the
studs of the hub.
11.
12.
Tighten the lug nuts with your fin-
gers onto the studs with the
OLMB063010
smaller end of the lug nuts clos- 13. Use the wheel lug nut wrench to
est to the wheel.
tighten the lug nuts in the order
shown. Double-check each lug
nut until they are tight. After
changing tires, we recommend
that an authorized HYUNDAI
Lower the vehicle to the ground
by turning the jack handle coun-
terclockwise.
6
✽ NOTICE
dealer tighten the lug nuts to their Check the tire pressure as soon as
proper torque as soon as possi- possible after installing a spare tire.
ble. The wheel lug nut should Adjust it to the recommended pres-
be tightened to 9~11 kg.m
sure.
(65~79
lb.ft).
6-19
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)