Electronic Air Suspension
Before operating EAS
MOTORWAY HEIGHT
Remember, even if a change of ride height is
selected, it will NOT take place if any door is
open.
At high speeds, the suspension is
automatically lowered to motorway
height to improve ride quality and
vehicle handling at motorway speeds. The
motorway height setting is approximately
NOTE: Frequent changes between ride heights
could cause the compressor to overheat. If this
occurs, EAS will be fully operational again after
a few minutes when the compressor has
cooled.
0.8
inches (20 mm) below the standard ride
height setting.
The motorway height setting is activated
automatically when the electronic air
suspension system detects the vehicle being
driven at more than 60 mph (100 km/h), for
more than 30 seconds.
1.
Ride height selector
Push the switch up or down to raise or lower
the vehicle to the next ride height setting.
When the system detects that the vehicle speed
has fallen below 45 mph (70 km/h) for more
than one minute, the vehicle automatically rises
to the standard height setting. If the vehicle
comes to rest while still at motorway height, the
vehicle will not rise unnecessarily.
2.
Ride height indicator panel
When the vehicle is at a particular ride height,
the corresponding indicator light illuminates. If
a new ride height is selected, the current
indicator light remains illuminated and the
indicator light for the new setting flashes, until
the new height is reached (the original indicator
light extinguishes). If the current ride height
indicator light flashes when a new height is
selected, the new ride height is invalid and the
height change will not be performed.
If the inhibit button is pressed while in
motorway height, the vehicle will not
automatically rise to standard height when the
vehicle speed falls. Motorway height will be
maintained until the inhibit switch is pressed
for a second time, when normal automatic
height adjustment is resumed.
3.
Suspension inhibit switch
Press to select inhibit mode (not operational at
Off-road height), the indicator light in the
switch illuminates. This prevents automatic or
manual changes between ride heights. Press
again to cancel inhibit mode.
Motorway height selection is fully automatic
and cannot be selected manually by the driver.
From motorway height, the driver can manually
select standard height, by rotating the ride
height selector up. If the vehicle is travelling at
less than 15 mph (25 km/h) the vehicle can be
lowered to access height by rotating the ride
height selector down.
Access height switch
Press to lower the vehicle to access height, for
easier loading/unloading. See ‘ACCESS
HEIGHT’, page 164, for further information.
163
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2003 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Fuel Type | Gasoline / Petrol |
| Engine Oil Type | 0W/30, 0W/50, 5W/30 or 5W/40 oil meeting API service level SJ/CD, EC11 and having a viscosity band recommended for the temperature range of your locality |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)