Engine Oil
Oil filter renewal
H4687
6.
7.
Attach the cap to the new filter element by
pushing it onto the end of the element.
Insert the element into the filter body and
screw down the cap. Tighten to 18 lbf.ft
(25
Nm)
8.
9.
Start and run the engine. Do not rev the
engine until the oil pressure warning light
extinguishes. Check for oil leaks around
the filter body.
H4686
The engine oil filter is located at the front of the
engine compartment.
Stop the engine, wait a few minutes, then
1.
2.
3.
Unscrew the filter cap anti-clockwise and
raise it slightly. The filter element will be
withdrawn by the cap.
Allow a few moments for the engine oil
retained within the filter body to drain
away.
With a suitable container handy, fully lift
off the cap and element together and place
them in the container.
check the oil level and top up if necessary.
4.
5.
Pull the cap from the element and clean it.
Clean the inside of the filter body.
203
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2003 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Fuel Type | Gasoline / Petrol |
| Engine Oil Type | 0W/30, 0W/50, 5W/30 or 5W/40 oil meeting API service level SJ/CD, EC11 and having a viscosity band recommended for the temperature range of your locality |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)