Spark Plugs
Fitting new spark plugs
When fitting new spark plugs, take care not to
cross-thread a plug, otherwise costly damage
to the cylinder head will result.
Only fit plugs of a type recommended by Land
Rover (see ‘V8 ENGINE’, page 273). Please
note that fitting incorrect grades of plug may
lead to engine failure and serious damage.
1.
Fit 8 new spark plugs and tighten to a
torque of 23 lbf.ft (31 Nm).
2.
3.
Fit an ignition coil to each plug.
Fit 14 nuts securing the ignition coils and
tighten them to 3 lbf.ft (4 Nm).
4.
5.
Fit 2 new ignition coil cover gaskets
Connect each multiplug to its ignition coil
and lock in position by pressing down
each locking clamp.
6.
Reposition the wiring harness and
camshaft cover earth leads, fit the
remaining 2 nuts and tighten to 3 lbf.ft
(4
Fit 2 bolt spacers to each ignition coil
cover.
Fit both ignition coil covers, tighten the
bolts and refit the 4 bolt access covers.
Refit the engine acoustic cover.
Reconnect the battery.
Nm).
7.
8.
9.
10.
207
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2003 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Fuel Type | Gasoline / Petrol |
| Engine Oil Type | 0W/30, 0W/50, 5W/30 or 5W/40 oil meeting API service level SJ/CD, EC11 and having a viscosity band recommended for the temperature range of your locality |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)