Practical hints
Flat tire
Lowering the vehicle
Replacing jack support tube cover
Warning!
G
̈
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
̈ Slide tongue of cover under the upper
edge of the tube opening.
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
̈ Applying even pressure, press cover
until it snaps into place. Be careful not
to damage the locking tabs or clamp
the plastic retaining strap.
̈
Remove the jack.
110 lb-ft. (150 Nm).
̈
Before storing the jack in the trunk, it
should be fully collapsed, with handle
folded in.
!
You can also screw the faulty wheel
down into the spare wheel well in the
trunk.
̈
Place the wheel bolt wrench, alignment
bolt and jack back in the vehicle tool kit
in the trunk and close the covering lid.
Do not activate the tire inflation pres-
sure monitor* until the depressurized
tire is no longer in the vehicle.
1
- 5 Wheel bolts
̈
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of
110
lb-ft (150 Nm).
365
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55, Mercedes-Benz S600 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)