Safety and Security
Occupant safety
Once the top tether anchorage hook is at-
tached, the child restraint itself can be se-
cured. Tighten the top tether strap
according to the child restraint manufac-
turer’s instructions.
Child seat anchors – LATCH type
̈ Move rear power seats*/bench* to the
rearmost position (୴ page 118).
This vehicle is equipped with two LATCH
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the rear seats) for
the installation of a LATCH child seat with
the matching anchor fittings.
̈ Fold upholstery blend 3 upward.
̈
Turn installation device 4 to a vertical
position so that upholstery blend 3
does not fold down.
̈
Reinstall cover after removing the
tether strap.
If you have not installed a child seat, the
LATCH anchor fittings are covered with an
upholstery blend.
̈
Install child seat according to the man-
ufacturer’s instructions.
Warning!
G
A solid connection is established be-
tween the child seat and the body of
the vehicle.
Vehicles with adjustable rear seats/bench*:
Never adjust the rear seat position after in-
stalling the child restraint. Adjusting the rear
seat position after installing the child re-
straint could damage the child restraint
and/or introduce undesirable slack into the
webbing and loosen or misposition the child
restraint, lessening the effectiveness of the
child restraint and thus increasing the
Do not adjust rear power seat*/bench*
position after installing child restraint.
chance or severity of injury in an accident.
Indicates the position of the anchors
Anchors
Upholstery blend
1
2
3
4
Installation device
73
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55, Mercedes-Benz S600 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |