100n
Parking lamps/low beams
Pathway lighting:
Automatic headlamp control*
When you activate the headlamp
flasher after parking the vehicle and
switching off the lamps, the low beams
will come on for a brief period. You may
also have this function deactivated if
you wish.<
When you set the switch to this
position, the system activates
and switches on and off the low
beams in response to changes in ambi-
ent light conditions, for instance, in tun-
nels, at dawn and dusk, and in rain and
snow.
Lights on warning
Whenever you open the driver's door,
after having turned the ignition key to
The low beams remain switched
on regardless of the ambient light
position 0, an acoustic signal will sound when you switch on the front fog
Parking lamps/side marker lamps for a few seconds to remind you that lamps.<
the lamps have not been switched off.
Alphanumeric Check Control*:
The reminder is given through the
The front, rear and side vehicle
lighting is switched on. You can
use the parking lamps for park-
Automatic headlamp control can-
not serve as a substitute for the
driver's judgment in determining when
the vehicle lamps should be switched
on. For example, the system cannot
detect fog. To avoid safety risks, you
should always switch on the lamps
manually under these conditions.<
ing. For lighting on one side for parking Check Control.
as an additional feature, refer to
page 101.
Daytime driving lamps*
The headlamps are automatically
switched on for daytime driving at igni-
Low beams
When the ignition is switched off tion key position 2.
and the low beams are on, only
the parking lamps/side marker
lamps remain on.
You can have the sensitivity of the
headlamp control system adjusted
on your vehicle.<
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)