58n
Transporting children safely
Installing child-restraint systems
Follow the child-restraint system
manufacturer's instructions when
selecting, installing and using child-
restraint systems. Otherwise the degree
of protection can be reduced.<
Commercially available child restraint
systems are designed for securing with
a lap belt or with the lap belt section
of a three-point belt. Incorrectly or
improperly installed child restraint sys-
tems can increase the risk of injury for
children. Always follow the instructions
for installing the system exactly.
Child-restraint system security
All rear safety belts and the safety belt
for the front passenger can be locked to There are three additional mounting
Child restraint system with tether
strap
On front passenger seat:
prevent them from being pulled out,
enabling them to be used for securing
child restraint systems.
points for child restraint systems with a
tether strap, refer to arrows.
Before mounting a child restraint
system on the front passenger
seat, make sure that the front and side
Locking safety belt:
airbag on the front passenger side are
deactivated, as otherwise there is an
increased risk of injury if the airbags are
triggered.<
1.
Secure child restraint system with
the belt
Pull out belt webbing completely
Allow belt webbing to be pulled in
and pull taut against child restraint
system. The safety belt is locked.
2.
3.
Before mounting a universal child-
restraint system, move the front pas-
senger seat into the highest position to
achieve the best possible belt routing.
Do not change this seat height.
Unlocking safety belt:
1.
2.
3.
Open belt buckle
Remove child restraint system
Allow belt webbing to be pulled in
completely
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)