Computer* in MID
89n
After three incorrect code entries, or
three attempts to start the engine with-
out a code entry, the alarm will sound
for 30 seconds on vehicles fitted with
an alarm system.
To have all the available information
displayed, press
>the button on the lever until PROG
shows on the display
>the SET button.
Deactivating the alarm in an emer-
gency:
To obtain individual items of informa-
tion, briefly press the button as often as
necessary.
If you have forgotten the code, proceed
as follows:
1.
Disconnect the battery, wait approx.
2 minutes, then reconnect it. Note
that on vehicles with an alarm sys-
tem, the alarm will sound
Remote control
The computer button on the turn signal
lever can be used to select the items of
computer information to be displayed.
2.
3.
Set the ignition key to position 1: the
time display will count down for the
next ten minutes
After ten minutes, start the engine.
To do this, press:
>
the button on the lever until PROG
shows on the display
the MID buttons in the order in which
you wish the information to be dis-
played.
If the code becomes available
again in the meantime, it can be
entered during the waiting period after
>
pressing the CODE button.<
Each time an entry is stored, the pro-
gram number appears on the display.
To terminate the selection procedure:
Press the right side of the button.
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)