Interior rearview mirror with digital compass*
117n
To change the zone setting, press the
How to correct this:
adjusting button repeatedly until the
number of the compass zone that
applies to your current position is dis-
played.
1.
Make sure that there are no large
metal objects or overhead power
lines in the vicinity of your vehicle
and that you have enough space to
drive in a circle
The compass will be operational again
after approximately 10 seconds.
2. Input the currently applicable com-
pass zone
3.
For automatic dimming action, refer to
Interior and exterior mirrors, automatic
dimming feature on page 138.
Press the adjustment button to bring
up C or CAL. Then drive in a com-
plete circle at a maximum speed of
4
mph/7 km/h.
Calibrating digital compass
1
2
Adjusting knob for compass zones
Display
If the calibration was successful, the
displays C or CAL are replaced with
the points of the compass.
In the following situations, the digital
compass must be calibrated:
The display indicates the cardinal and/
or intercardinal direction in which you
are currently driving.
>
>
C or CAL appears on the display
The wrong cardinal direction appears
on the display
>
The cardinal direction displayed does
not change despite a change in the
direction of travel
Setting compass zones
Depending on where you and your vehi-
cle are located, it is necessary to set >Not all cardinal directions are dis-
the appropriate compass zone, refer to
world map with compass zones,
page 118.
played.
To set the compass zone, press the
adjusting button in the mirror frame for
approx. 3-4 seconds with a sharp
object, e.g. a ball-point pen or the like.
The display indicates the number of the
currently set compass zone.
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)