162n
Lamps and bulbs
3 Parking lamps and roadside
parking lamps
10 watt bulb: H 10 W
1.
2.
3.
Remove the cover
Disconnect the plug
Turn reflector module with bulb to
left and remove
4.
Replace module with bulb.
Xenon lamps*
The operating life of these lamp units
is extremely long and the likelihood of
failure very low, provided that they are
not switched on and off a very great
number of times. If one of these bulbs
should nevertheless fail, it is possible to
continue driving with great caution
using the fog lamps, provided traffic
laws in your area do not prohibit this.
2 Halogen high beams
H1 bulb, 55 watts
Side turn signals
5 watt bulb: WY 5 W
1. Use finger pressure against the rear
end of the lamp, refer to arrow, to
press it forward for removal
2. Apply gentle pressure to the bulb
while turning it to the left and pull it
out
The bulb is pressurized. There-
fore, wear safety glasses and pro-
tective gloves. Otherwise there is a
danger of injury if the bulb is acciden-
tally damaged during replacement.<
To avoid risk of potentially fatal
injuries: owing to the extremely
high voltages at which these units oper-
ate, service work should always be
entrusted to qualified personnel.<
3. Replace the bulb.
1.
2.
3.
4.
Remove the cover
Disconnect the plug
Unhook wire spring
Remove and replace the bulb.
Front turn signals/side-marker
lamps
Bulb S8 yellow
Please contact a BMW Sports Activity
Vehicle center in case of a malfunction.
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)