Confirming memory storage
switch (1 or 2) fully for at least 1
second.
the previous positions (entry/exit
function).)
ț Turn the ignition ON and push the SET
switch. If the main memory has not
been stored, the indicator light will
come on for approximately 0.5 sec-
onds. When the memory has stored in
position, the indicator light will stay
on for approximately 5 seconds.
țWithin 45 seconds of opening the
driver’s door, push the memory
switch (1 or 2) fully for at least 1
second.
ț when the memory switch 1 or 2 is not
pushed and held for at least 1second.
ț when the seat has already been
moved to the memorized position.
The driver’s seat and steering column
will move to the memorized position
with the indicator light flashing, and
then the light will stay on for approxi-
mately 5 seconds.
ț when no seat position is stored in the
memory switch.
ț Ifthe battery cable is disconnected, or
if the fuse opens, the memory will be
canceled.
ț when the parking brake isnot applied.
— MT models
ț when the speed is above 4 MPH (7
km/h) while the parking brake is ap-
plied. — MT models
To restart the drive positioner system,
move the parking brake to off and on.
SYSTEM OPERATION
Reset the desired position using the
previous procedure.
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
Selecting the memorized position
1.
For vehicles equipped with automatic
transmission, move the selector lever
to the P (Park) position.
ț when the front seat is folded for oper-
ating the walk-in mechanism (if so
equipped).
ț when the vehicle speed is above 4
MPH (7 km/h).
ț when the adjusting switch for the driv-
er’s seat and steering column is
turned on while the automatic drive
positioner is operating.
For vehicles equipped with manual
transmission, move the shift lever in
the N (Neutral) position and apply the
parking brake.
ț when the engine is started while the
automatic drive positioner isoperating.
ț when the AT selector lever is moved
from the P position to any other posi-
tion. (However, it will not be cancelled
if the switch is pushed while the seat
and steering column are returning to
2.
Use one of the following methods to
ț when
the
cancel
switch
(if
so
move
the
driver’s
seat
and
the
equipped) is pushed to the CANCEL
side. (However, itwill not be cancelled
if the switch is pushed while the seat
and steering column are returning to
steering wheel.
the
previous positions (entry/exit
țTurn the ignition switch to the “ON”
function).)
position
and push the memory
3-36
Pre-drivingchecksandadjustments
| Categories | Infiniti G Series Manuals, Infiniti Manuals |
|---|---|
| Tags | Coupe, Infiniti G35 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2006 Infiniti G35 Coupe Sedan Owners Manual 3.0 out of 3.0 based on 1 product reviews. So far, so good! Shared opinion should be after experience.