restraint and it is interfering with the
proper booster seat fit, try another
seating position or a different booster
seat.
3.
4.
Position the lap portion of the seat
belt low and snug on the child’s hips.
Be sure to follow the booster seat
manufacturer’s instructions for ad-
justing the belt routing.
Pull the shoulder belt portion of the
seat belt toward the retractor to take
up extra slack. Be sure the shoulder
belt is positioned across the top,
middle portion of the child’s shoulder.
Be sure to follow the booster seat
manufacturer’s instructions for ad-
justing the belt routing.
LRS0452
LRS0451
Outboardposition
Centerposition
BOOSTER SEAT INSTALLATION ON
REAR SEAT OUTBOARD OR CENTER
POSITIONS
1. Position the booster seat on the seat.
Only place it in a front-facing direc-
tion. Always follow the booster seat
manufacturer’s instructions.
5. Follow the warnings, cautions and in-
structions for properly fastening aseat
belt shown in the “Three-point type
seat belts with retractor” earlier in
this section.
2.
The booster seat should be positioned
on the vehicle seat so that it is stable.
If necessary, adjust or remove the
head restraint to obtain the correct
booster seat fit. See “Head restraint
adjustment” earlier in this section. If
the head restraint is removed, store it
in a secure place. Be sure to install
the head restraint when the booster
seat is removed. If the seating posi-
tion does not have an adjustable head
CAUTION
Do not use a lap/shoulder belt automatic
locking mode when using a booster seat
withtheseatbelts.
When you install a booster seat in the
rear seat, follow these steps:
1-34
Safety—Seats,seatbeltsandsupplementalrestraintsystem
Product Specification
Categories | Infiniti G Series Manuals, Infiniti Manuals |
---|---|
Tags | Coupe, Infiniti G35 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
So far, so good! Shared opinion should be after experience.