First, adjust the seatback so that it is up- Anchor point locations
right (if so equipped). Remove the anchor
Anchor points are located on the rear par-
cover from the anchor point as illustrated.
Keep the removed cover in a secure place
to prevent loss or damage. Then secure
the child restraint with the rear seat belt
or the LATCH system (outboard positions),
as applicable.
cel shelf finisher.
Ifyou have any questions when installing
atopstrap child restraint ontherearseat,
consult anINFINITI dealer fordetails.
Remove the head restraint from the seat-
back, if equipped with an adjustable rear
head restraint. Store it in a secure place.
Position the top tether strap over the top
ofthe seatback and secure ittothe tether
anchorage that provides the straightest
installation. Tighten the tether strap ac-
cording to the manufacturer’s instruction
to remove any slack.
SSS0282
Coupe
ț
Afterremovingarearseatheadrestraint
for top tether installation, store it se-
curelytopreventitfromcausinginjuryto
passengersordamagetothevehiclein
case ofsudden braking oranaccident.
Always replace it and adjust properly
whentoptetherisnolongerinuse.
For best child restraint fit, see the child
restraint installation instructions in this
section and the child restraint manufac-
turer’s instructions.
If your child restraint has a top tether
strap, it must be secured to the anchor
point provided behind its position.
Safety—Seats,seatbeltsandsupplementalrestraintsystem 1-27
Product Specification
Categories | Infiniti G Series Manuals, Infiniti Manuals |
---|---|
Tags | Coupe, Infiniti G35 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
So far, so good! Shared opinion should be after experience.