aligned with the pin on the brake
rotor.
Assoonaspossible tighten thewheelnuts
to the specified torque with a torque
wrench.
3.
4.
With the wheel nut wrench, tighten
wheel nuts alternately and evenly until
they are tight.
Wheel nuttightening torque:
80
ft-lb(108N⅐m)
Lower the vehicle slowly until the tire
touches the ground. Then, with the
wheel nut wrench, tighten the wheel
nuts securely in the sequence illus-
trated (k1 , k2 , k3 , k4 , k5 ). Lower the
vehicle completely.
The wheel nuts must bekept tightened to
specification at all times. It is recom-
mended that wheel nuts be tightened to
specification ateachlubrication interval.
Adjust the tire pressure tothe COLD pres-
sure.
WARNING
COLD pressure:
SCE0039
Afterthevehicle hasbeenparked forthree
hours or more or driven less than 1 mile
ț
Incorrectwheelnutsorimproperlytight-
enedwheelnutscancausethewheelto
become loose or come off. This could
causeanaccident.
Installing the spare tire
(1.6
km)atmoderate speeds.
The spare tireisdesigned emergency use.
See
specific
instructions
under
the
COLD tire pressures are shown onthe Tire
and Loading Information label affixed to
thedriver sidecenter pillar.
heading “Wheels and tires” in the “8.
Maintenance anddo-it-yourself” section.
ț
ț
Do not use oil or grease on the wheel
studsornuts.Thiscouldcausethenuts
tobecomeloose.
1.
Clean any mud or dirt from the surface
between the wheel and hub.
Retighten the wheel nuts after the ve-
hicle has been driven for 600 miles
2.
Carefully put the wheel on and tighten
the wheel nuts finger tight.
(1,000
etc.).
km) (also in cases of a flat tire,
(Coupe models)
When replacing a front tire, make sure
the hole in the spare tire wheel is
Incaseofemergency 6-7
Product Specification
Categories | Infiniti G Series Manuals, Infiniti Manuals |
---|---|
Tags | Coupe, Infiniti G35 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
So far, so good! Shared opinion should be after experience.