Use the up-shift indicator when driving as
follows:
ț If the maximum engine speed is de-
sired, set the figure at7,000 rpm. (The
indicator starts flashing from about
6,500
7,000
rpm and comes on steady at
rpm.)
ț If the maximum engine torque is de-
sired, set the figure at 4,800 rpm.
(The indicator starts flashing from
about 4,300 rpm and comes on steady
at 4,800 rpm.)
ț If you want to break in your vehicle,
use of the up-shift indicator with a
rather low figure will help you to avoid
the high engine speed.
SSD0432
SSD0433
Up-shift indicator
Up-shift indicator setting:
The desired engine speed (rpm) for the
up-shift indicator can be set while the up-
shift indicator setting mode is selected.
Change the display to the up-shift indica-
tor mode by pushing the trip odometer
The manual transmission up-shift indi-
cator is located in the meter and shows
the driver the timing to shift into a higher
gear by illuminating. The use of the up-
shift indicator will help you to upshift at a
constant engine speed (rpm) from any
gear.
To make the up-shift indicator not come
on, set the figure at above 7,900 rpm.
There may be aslight difference between
the timing ofthe up-shift indicator illumi-
nation andthetachometer indication.
k
reset switch 1 .When the up-shift indica-
tor setting mode is selected, the engine
speed currently set is displayed. (The ini-
tial factory setting is 8,000 rpm.) The fig-
ure can be changed between 2,000 and
The up-shift indicator will start flashing
when the engine speed is within about
rpm of the set figure while driving,
8,000
rpm.
500
and then illuminate after the engine
speed reaches the set figure.
Startinganddriving 5-17
Product Specification
Categories | Infiniti G Series Manuals, Infiniti Manuals |
---|---|
Tags | Coupe, Infiniti G35 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
So far, so good! Shared opinion should be after experience.