speed. Otherwise, your vehicle may be
damaged and/or vehicle handling and
performance may be adversely affected.
Thewheelnutsmustbekepttightened
tospecificationatalltimes.Itisrecom-
mendedthatwheelnutsbetightenedto
specification at each tire rotation in-
terval.
Tire chains must be installed only on the
rearwheels andnotonthefrontwheels.
Never install tire chains on a TEMPORARY
USE ONLY spare tire.
WARNING
Do not use the chains on dry roads. Driv-
ing with chains in such conditions can
cause damage to the various mechanisms
of the vehicle due to some overstress.
ț Afterrotatingthetires,checkand
adjustthetirepressure.
ț
Retightenthewheelnutswhenthe
vehicle has been driven for 600
miles(1,000km)(alsoincasesofa
flattire,etc.).
DI0048-D
Sedan
CHANGING WHEELS AND TIRES
Tirerotation(Sedan)
ț Do not include the T-type spare
tireoranyothersmallsizespare
tireinthetirerotation.
INFINITI recommends rotating the tires
every7,500miles(12,000km).
ț For additional information re-
garding tires, refer to“Important
Tire Safety Information” (US) or
“TireSafetyInformation”(Canada)
See “Flat tire” in the “6. In case of
emergency” section for tire replacing
procedures.
in the Warranty
Booklet.
Information
Assoonaspossible, tighten thewheel
nuts to the specified torque with a
torquewrench.
Tirerotation(Coupe)
Wheelnuttighteningtorque:
Tires cannot be rotated on this vehicle,
as front tires are a different size from
80
ft-lb(108N⅐m)
Maintenanceanddo-it-yourself 8-45
Product Specification
Categories | Infiniti G Series Manuals, Infiniti Manuals |
---|---|
Tags | Coupe, Infiniti G35 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
So far, so good! Shared opinion should be after experience.