Controls in detail
Lighting
Daytime running lamp mode
Canada only:
USA only:
̈
Turn the exterior lamp switch to
position M or U.
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
By default, the daytime running lamp mode
is deactivated. Activate the daytime
running lamp mode using the control
system, see “Set daytime running lamp
mode (USA only)” (୴ page 149).
When the engine is running, the low beam
headlamps are switched on.
Vehicles with automatic transmission*:
When the engine is running, and you shift
from a driving position to position N or P,
the low beam headlamps will switch off
with a three-minute delay.
In low ambient light conditions, the
following lamps will switch on additionally:
When the engine is running, and you turn
the exterior lamp switch to position C
ț
ț
ț
Tail and parking lamps
License plate lamps
Side marker lamps
or B, the manual headlamp mode has
priority over the daytime running lamp
mode.
When the engine is running, and you
ț
turn the exterior lamp switch to
position C
, the parking lamps
The corresponding exterior lamps switch
on (୴ page 118).
switch on additionally.
For nighttime driving you should turn the
exterior lamp switch to position B to
permit activation of the high beam head-
lamps.
ț
turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime
running lamp mode.
i
The corresponding exterior lamps
switch on (୴ page 118).
With the daytime running lamp mode
activated and the exterior lamp switch
in position M, the high beam head-
lamps cannot be switched on.
The high beam flasher is available at all
times.
120
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-benz W203 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.