Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the
ignition, have the respective bulb checked
and replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp
comes on while driving.
The ABS has detected a malfunction and
has switched off. The BAS and the ESP
®
are also switched off (see messages in dis-
play).
̈ Continue driving with added caution.
Wheels may lock during hard braking,
reducing steering capability.
̈
Read and observe messages in the dis-
The brake system is still functioning nor-
mally but without the ABS available.
play (୴ page 358).
̈
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
If the ABS control unit is malfunctioning,
other systems such as the navigation
system* or the automatic transmission*
may also be malfunctioning.
Failure to follow these instructions
increases the risk of an accident.
The charging voltage has fallen below ten ̈ Switch off electrical consumers that are
volts. The ABS has switched off.
currently not needed, e.g. seat heating*.
The battery might not be charged suffi-
ciently.
̈ If necessary, have the generator
(alternator) and battery checked.
When the voltage is above this value again,
the ABS is operational again.
350
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-benz W203 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.