Practical hints
Flat tire
Lowering the vehicle
Warning!
G
̈
Lower vehicle by turning crank
counterclockwise until vehicle is
resting fully on its own weight.
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque
of 80 lb-ft (110 Nm).
̈
Remove the jack.
Before storing the jack, it should be fully
collapsed, with handle folded in (storage
position) (୴ page 385).
̈
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
̈
Store the jack and the other vehicle
tools in the trunk.
Warning!
G
Only use genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
1
- 5
Wheel bolts
̈ Tighten the five wheel bolts evenly,
following the diagonal sequence
illustrated (1 to 5), until all bolts are
tight. Observe a tightening torque
of 80 lb-ft (110 Nm).
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could fall off the jack.
410
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-benz W203 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2006 Mercedes-Benz C-Class Operators Manual C230 Sport C280 4MATIC C350 4MATIC C350 Sport 5.0 out of 5.0 based on 1 product reviews.
Comments are closed.