Controls in detail
Automatic transmission*
An additional indication of the current gear
selector lever position can be found on the
cover of the shifting-gate.
!
Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.
The indicators come on when you activate
a switch (e.g. unlocking the vehicle or
opening a door) and go out after approxi-
mately 15 minutes.
Shift into reverse gear R or parking
position P only when the vehicle is
stopped.
Warning!
G
Avoid spinning of a drive wheel for an
extended period when driving off on
slippery road surfaces. This may cause
serious damage to the drivetrain which
is not covered by the Mercedes-Benz
Limited Warranty.
1
2
Current gear range/gear selector lever
position
Current program mode
It is dangerous to shift the gear selector
lever out of P or N if the engine speed is
higher than idle speed. If your foot is not
firmly on the brake pedal, the vehicle could
accelerate quickly forward or reverse. You
could lose control of the vehicle and hit
someone or something. Only shift into gear
when the engine is idling normally and when
your right foot is firmly on the brake pedal.
The current gear range/gear selector lever
position and program mode (C/S) appear
in the multifunction display.
When the gear selector lever is in
position D, you can influence transmission
shifting by:
ț
ț
limiting the gear range
changing gears manually
163
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-benz W203 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2006 Mercedes-Benz C-Class Operators Manual C230 Sport C280 4MATIC C350 4MATIC C350 Sport 5.0 out of 5.0 based on 1 product reviews.
Comments are closed.