3-
4 WHAT TO DO IN AN EMERGENCY
1
. Ensurethattheboosterbatteryis12
volt type. If the booster battery is
installed in another vehicle, ensure
that the two vehicles are not touch-
ing.
Turn off all unnecessary electrical
equipment in both vehicles.
Ensure that the engine of the ve-
hicle providing the jump start is run-
ning prior to connection of the jump
cables.
Connect the red jump cable to the
positive (+) terminal of the booster
battery and the other end to the
positive (+) terminal of the dis-
charged battery.
Attach the black jump cable to the
negative (-) terminal of the booster
battery,andtheotherendtoaground
pointwithintheenginecompartment
ofthevehiclewiththeflatbattery.Do
not connect to the negative battery
terminal of the flat battery since
sparks may be generated with the
subsequent risk of explosion.
6. Raise the booster vehicle engine
speed to 2,000 r.p.m. and start the
engine of the vehicle with the flat
battery.
7. SwitchONthemainbeamheadlamps
beforecarefullyremovingthejumper
cablesinthereverseorderofattach-
ment. Once the jumper cables have
been removed, switch "OFF" the
mainbeamheadlamps.
D030A02TB-EAT
IF THE ENGINE OVERHEATS
If the temperature gauge indicates
overheating:
2.
1.
2.
Pullofftheroadandstopassoonas
it is safe to do so.
3.
Place the gear selector lever in "P"
(automatic), or neutral (manual
transaxle)andsettheparkingbrake.
Iftheairconditioningison,turnitoff.
Ifcoolantisrunningoutunderthecar
or steam is coming out from under
the bonnet stop the engine. Do not
openthebonnetuntilthecoolanthas
stoppedrunningorthesteaminghas
stopped. If there is no visible loss of
coolant and no steam, leave the
engine running and check to be sure
the engine cooling fan is operating.
If the fan is not running, turn the
engine off.
4.
5.
3.
!
CAUTION:
If the jump cable is incorrectly in-
stalled, damage to the vehicle elec-
trical system may occur, in particu-
lar the electronic components such
as the Fuel Injection system com-
puter and the Automatic transaxle
computer.Thebatterymustneverbe
disconnected whilst the engine is
running.
4. Checktoseeifthewaterpumpdrive
belt is missing. If it is not missing,
check to see that it is tight. If the
drive belt seems to be satisfactory,
check for coolant leaking from the
radiator, hoses or under the car. (If
theairconditioninghadbeeninuse,
it is normal for cold water to be
draining from it).
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)