FEATURES OF YOUR HYUNDAI 1-25
You should place the belt as low as
possible on your hips, not on your
waist. If the belt is located too high on
your body, you could slide under it in
case of accident or a sudden stop.
This could result of death, serious
injury or property damage. Both arms
should not be under or over the belt.
Rather, one should be over and the
otherunder,asshownintheillustration.
Neverweartheseatbeltunderthearm
nearest the door.
If this does not happen, check the belt
to be sure it is not twisted, then try
again.
B220B01A-AAT
Adjusting Your Seat Belt
B220A01A-AAT
SEAT BELTS (2-Point Static
Type) (Rear Seat Center)
(If Installed)
To Fasten Your Seat Belt
Too
high
Correct
B220B01NF
B210A01A-AAT
To Release the Seat Belt
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten
the belt and pull on the loose end to
tighten. The belt should be placed as
low as possible on your hips, not on
your waist. If the belt is too high, it
could increase the possibility of your
being injured in an accident.
B220A04NF
To fasten a 2-point static type belt,
insert the metal tab into the locking
buckle. There will be an audible "click"
when the tab locks into the buckle.
Checktomakesurethebeltisproperly
locked and that the belt is not twisted.
B210A01NF
The seat belt is released by pressing
thereleasebuttoninthelockingbuckle.
When it is released, the belt should
automatically draw back into the re-
tractor.
Product Specification
Categories | Hyundai Manuals, Hyundai Getz Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Getz |
Document File Type | |
Copyright | Attribution Non-commercial |