Refueling
163
Adding AdBlue®
AdBlue®
G Warning!
Important notes on use
Make sure
BlueTEC exhaust gas aftertreatment24 must
be operated with AdBlue® reducing agent in
order to function properly. Adding AdBlue® is
RAdBlue® does not come into contact with
skin, eyes, or clothing
one of the tasks performed during
Rto keep AdBlue® out of the reach of children
maintenance. Under normal operating
conditions, a tank of AdBlue® lasts until the
next service due date.
If you and/or others have come into contact
with AdBlue®:
RIf AdBlue® has gotten into contact with
eyes, flush with plenty of water immediately
and seek medical help.
When the AdBlue® supply has almost run out,
theCheck Additive – See Operator's
Manual message is shown in the
multifunction display.
When the AdBlue® supply sinks to a minimum
level, theRemaining Starts: 20 message
RClean affected skin immediately with plenty
of water.
RIf AdBlue® was swallowed, rinse mouth
immediately with plenty of water and drink
plenty of water. Consult a physician.
is shown in the multifunction display.
i When theRemaining Starts: 20
message is shown in the multifunction
G Warning!
display, you can start the engine 20 more
times. If AdBlue® is not topped up, it is then
not possible to start the engine again. Top
up the AdBlue® tank with approximately
When opening the filler cap of the AdBlue®
tank ammonia gas vapors may escape. Refill
AdBlue® in a well ventilated area only.
Ammonia gas vapors have a pungent odor and
are particularly irritating for your skin,
mucous membranes, and eyes. Inhaling
ammonia gas vapors will cause burning eyes,
nose, and throat, as well as coughing and
watering eyes.
1
gallon (3.8 l) of AdBlue® or have the
AdBlue® tank refilled at a qualified
specialist workshop, e.g. an authorized
Mercedes-Benz Center.
Use the special AdBlue® refill bottle when
adding between maintenance intervals. For
more information, please contact an
authorized Mercedes-Benz Center or
Roadside Assistance if applicable
!
Only use AdBlue® that complies with
ISO 22241. Do not add any special
additives to AdBlue® and do not thin
AdBlue® with water. This could destroy the
BlueTEC exhaust gas aftertreatment.
(
Y page 20).
Further information about BlueTEC exhaust
gas aftertreatment and AdBlue® is available
at any authorized Mercedes-Benz Center.
! Rinse surfaces that have come into
contact with AdBlue® immediately with
water or remove AdBlue® using a damp
cloth and cold water. If the AdBlue® has
already crystallized, use a sponge and cold
water to clean it. AdBlue® residues
crystallize after time and contaminate the
affected surfaces.
24
Only on BlueTEC vehicles.
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)