Stowage areas
275
accessories and/or the objects attached to
them could come loose from the vehicle,
thereby injuring you and other persons and/
or causing damage to property, including
damage to your vehicle.
!
Have a second person assist you when
installing the crossbars. Otherwise, the
vehicle could be damaged.
!
Objects that are attached to crossbar
system accessories must not limit or
obstruct the movement of the sliding
sunroof. Otherwise, the tilt/sliding sunroof
could be damaged when it is raised.
B Front crossbar
C Rear crossbar
D Recesses
E Markings
F Roof rails
X Position front crossbarB between marks
E on roof railsF.
i There are marksE on the inner edge of
the roof rail that are identified by white
lines.
: Key
; Protective cap
= FRONT (or REAR) sticker
? Bolt for the clamping claw
A Clamping claw
The front and rear crossbars differ in length.
For this reason, pay attention to FRONT or
REAR sticker= on the crossbars.
? Bolt for the clamping claw
A Clamping claw
F Roof rails
X Unlock protective cap; using key:
X Remove protective cap;.
.
Sticker= for identifying the installation
location FRONT or REAR becomes visible.
X Turn bolt? counter-clockwise using the
Allen key until clamping clawA is wide
open.
X Ensure that clamping clawA sits flush
against the inner edge of roof railF.
If necessary, adjust the span width of the
crossbar (Y page 276).
X Slightly tighten up bolts? on both sides
in a clockwise direction.
X Position rear crossbarC on roof railsF
so that the clamping claws engage in
recessesD in the roof rails.
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)