Occupant safety
57
X Slide the belt sash guide downwards.
X Release belt sash guide release: and
make sure that the belt sash guide has
engaged.
driver's and front-passenger seat belt are
fastened.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7
seat belt warning lamp lights up and a
warning tone sounds again.
Releasing seat belts
The warning tone ceases even if the driver or
front passenger have still not fastened their
seat belt after 60 seconds. The7 seat belt
warning lamp stops flashing but continues to
be illuminated.
After the vehicle has come to a standstill, the
warning tone is reactivated and the7 seat
belt warning lamp flashes again if the vehicle
speed has exceeded 15 mph (25 km/h).
X Press release button?(Y page 55) and
guide belt tongue;(Y page 55) back
towards belt sash guide:(Y page 55).
!
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Consult an authorized Mercedes-
Benz Center.
The7 seat belt warning lamp only goes
out if:
Rboth the driver and the front passenger
have fastened their seat belts
or
Belt warning for driver and front
passenger
Rthe vehicle is stationary and a door is open
i For more information on the7 seat
belt warning lamp, see "Indicator and
warning lamps in the instrument cluster,
seat belt" (Y page 255).
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the7 seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out once the driver and
the front passenger have fastened their seat
belts.
Emergency Tensioning Devices and
seat belt force limiters
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. The warning tone goes out
The seat belts for the front seats are equipped
with ETDs/belt buckle tensioners and seat
belt force limiters. The outer seat belts in the
after approximately six seconds or once the second row of seats are equipped with ETDs
driver's seat belt is fastened.
and belt force limiters. The seat belts for the
third row of seats are equipped with ETDs.
If after six seconds the driver or front-
passenger have not fastened their seat belts
and the doors are closed:
!
If the front-passenger seat is not
occupied, do not engage the seat belt
tongue in the buckle on the front-
passenger seat. Otherwise, the Emergency
Tensioning Device/belt buckle tensioner
could be triggered in the event of an
accident.
Rthe7 seat belt warning lamp remains
illuminated as long as either the driver's or
front-passenger seat belt is not fastened.
Rif the vehicle speed once exceeds 15 mph
(25
km/h), the7 seat belt warning
lamp lights up. Additionally, a warning tone ETDs/belt buckle tensioners tighten the seat
will sound with increasing intensity for a
maximum of 60 seconds or until the
belts in an accident, pulling them close
against the body.
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)