Display messages
228
Driving systems
Display messages
Possible causes/consequences andM Solutions
°
Vehicle Rising
Wait Briefly
The vehicle level is too low.
X Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Wait until the display message disappears before pulling away.
G Risk of accident
°
You have pulled away while the vehicle level is still too low or
AIRMATIC is faulty.
STOP Car Too Low
AIRMATIC sets the vehicle to the selected level after a short
period. While the display message is displayed:
X Make only slight steering movements. The front fender or the
tires could otherwise be damaged when the steering movement
is too large.
X Listen for scraping sounds.
X Do not drive faster than 50 mph (80 km/h).
If the display message continues to be displayed:
X Have the vehicle checked at a qualified specialist workshop.
°
Level Selection
Not Permitted
You cannot change the vehicle level because you are exceeding
the permissible speed for the selected vehicle level.
X Drive more slowly and then select the desired vehicle level again
(
Y page 183).
°
Compressor Cooling
Down
You have selected a higher vehicle level. The compressor first
needs to cool down because of frequent level changes.
X Drive in a manner appropriate for the current vehicle level.
X Make sure that there is sufficient ground clearance.
X Allow the compressor to cool down.
When the compressor has cooled down, the display message
disappears. The vehicle then continues rising to the selected
level.
°
AIRMATIC is faulty.
X Do not drive faster than 50 mph(80 km/h).
X Make sure that there is sufficient ground clearance.
X Have the vehicle checked at a qualified specialist workshop.
Malfunction
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)