Where will I find...?
295
: Lug wrench
X Turn retaining screw: counter-clockwise
and out of tool holder= and remove it.
; Electric air pump
= Instructions on the installation position of
the vehicle tool kit holder
? Fuse allocation chart
A Alignment bolt
B Folding wheel chock
C Towing eye
i If retaining screw: does not come out
immediately, turn tool holder= slightly
counter-clockwise.
Retaining screw: can then be unscrewed
with ease.
X Turn tool holder= approximately 180°, so
that the electric air pump points
backwards.
D Wheel bolts
E Stowage well
F Ratchet ring spanner
G Jack
X Remove tool holder= from collapsible
spare wheel;
.
X Remove collapsible spare wheel; from
the emergency spare wheel well.
Collapsible spare wheel
For further information on changing a wheel
and mounting the spare wheel, see
Removing the collapsible spare wheel
(
Y page 301).
The collapsible spare wheel can be found in
the stowage well under the cargo
compartment floor.
Stowing a used collapsible spare wheel
X Lift the cargo compartment floor up
Take the following steps to stow a used
collapsible spare wheel. It will otherwise not
fit in the spare wheel well. Mercedes-Benz
recommends that you have this work carried
out at a qualified specialist workshop, e.g. an
authorized Mercedes-Benz Center.
(
Y page 294).
X Remove the jack from the tool holder
(Y page 294).
!
Only place the collapsible spare wheel in
the vehicle when it is dry. Otherwise,
moisture may get into the vehicle.
X Unscrew the valve cap from the valve.
X If possible, unscrew the valve insert from
the valve and release the air.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)